User's Manual

23
;মm]|ohmo
our_om;
0-v;|umvo@ĺouvol;_;-7v;|
models, you may need to turn on
the headset and reconnect it to
the telephone base again.
|o1omm;1ঞom
A cell device may be
disconnected from the telephone
base when:
• The Bluetooth feature of
your connected cell device is
|um;7o@ĺ
• The power of your cell device
bv|um;7o@ĺ
• Your cell device is not within
range of the telephone base.
[;u|_;1;ѴѴ7;b1;bv
disconnected, wait for about 1
minute. Then, power on the cell
device, turn on the Bluetooth
feature, or move it within range
of the base, the base will try to
reconnect to the cell device. If
you disconnect the cell device
from the cell devices list,
|_;0-v;bѴѴmo|-;lr||o
reconnect unless your cell device
is moved out of range and back
in range again.
Note
• =ou1;ѲѲ7;b1;7o;v
mo|u;1omm;1||o|_;0-v;
-|ol-ࢼ1-ѲѲĶ=oѲѲo|_;v;1ࢼom
0;Ѳo|o1omm;1|b|l-m-ѲѲĸ
Connect a paired cell
phone or headset
If you need to connect your
paired cell phone or headset to
the telephone base manually:
1. Press
Ɛ and/or
Ƒ on the telephone
base when it is not in use. The
Ɛ and/or Ƒ
Ѵb]_|Y-v_;vĺ
2. When the cell phone or
headset is connected to the
telephone base, you hear two
beeps. The corresponding
status icon (
1
or
2
) displays.
The corresponding device light
(
Ɛ and/or Ƒ )
turns on.
Disconnect a paired cell
phone or headset
If you need to disconnect a
paired cell phone or headset
from the telephone base, refer
to the user’s manuals of your cell
r_om;ou_;-7v;|=oubmv|u1ঞomv
to disconnect a Bluetooth device.