User's Manual

22
;মm]|ohmo
our_om;
Ɛ/ Ƒ. Then
repeat the steps above to pair
and connect again. In some
cases, it may take you a few
-;lr|v|o1olrѴ;|;|_;r-bubm]
process.
The steps for the pairing process
l--u=ou7b@;u;m|1;ѴѴ
phones. If this happens, follow
the prompts on your cell phone
and your RT802/RT803/RT804/
RT803XT/RT804T/RT805XT to
complete the pairing process.
Add a Bluetooth enabled
headset
$or-bu-m71omm;1|-_;-7v;|Ĺ
1. Press MENU on the phone
when it is not in use.
2. Press CID/
or / to choose
Bluetooth, and then press
"$.
3. Press CID/
or / to choose
77$_;-7v;|, and then
press "$. The screen
displays ";-u1__;-7v;|ĺĺĺ.
• If there is already a cell device
bm|_;vѴo|ķ|_;;bvঞm]1;ѴѴ
phone will be erased from
the cell devices list.
4. Set your headset to
discoverable mode (refer to
the user’s manual of your
headset on the Bluetooth
feature of your headset).
m1;ou_-m7v;|Cm7vou
headset, press "$.
• Enter the PIN of your
_;-7v;|b=u;tbu;7ĺ$_;
for most Bluetooth devices
is 0000 (refer to the user’s
manual of your headset), then
press "$.
5. When the headset is
successfully paired and
connected to the telephone
base, the
2
icon displays. The
Ƒ device light turns
on.
The pairing process may take up
to one minute. If the pairing
ruo1;vv=-bѴvķ|umo@|_;
Bluetooth feature on your
headset and on the RT802/
RT803/RT804/RT803XT/
RT804T/RT805XT by pressing
Ƒ. Then repeat the steps
above to pair and connect again.
In some cases, it may take you a
=;-;lr|v|o1olrѴ;|;|_;
pairing process.
When a connected headset is
charging, it may disconnect from
the telephone base and the
Ƒ light on the telephone