Quick Start Guide

83
Answering system
Remote access
You can reach your answering system remotely by dialing your home telephone
number from any touch-tone telephone.
To remotely access the answering system
1. Dial your telephone number from any touch-tone telephone.
2. Once the system plays your announcement, enter the two-digit remote
access code (19 is the default code, see page 75 to change it).
f The system automatically announces the number of new or old messages
(if any), and then begins to play them.
3. You can also enter the following remote commands.
Remote commands
1
Press to listen to all messages.
2
Press to listen to new messages only.
3
Press to delete the current message (during playback).
33
Press twice to delete all old messages.
4
Press to repeat the current message (during playback).
44
Press twice to listen to the previous message.
5
Press to stop.
*5
Press to listen to a list of remote commands.
6
Press to skip to the next message (during playback).
*7
Press to record a new announcement.
8
Press to hang up the call.
0
Press to turn the answering system on or off.
4. Hang up or press 8 to end the call.
Cut and carry the remote access wallet card at the back of this user’s manual
for quick reference.