Quick Start Guide

52
Smart call blocker
Call block settings
Review block list:
1. Press CALL BLOCK to enter the main menu when the handset is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in use.
Press
CID or DIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press
CID or DIR to scroll to Block list, and then press MENU/SELECT.
3. Press MENU/SELECT to choose Review.
4. Press
CID or DIR to browse through the block entries.
Note: ¥¼ÆÇ¸ÀÃÇÌappears if there are no block entries.
Save a caller ID log entry to block list:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 40).
2. When the desired entry displays, press
MENU/SELECT.
3. Press TCID or SDIR to scroll to To Block list, then press MENU/SELECT.
4. The handset displays Enter number. Use the dialing keys to edit the number,
when necessary.
f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Ç
f Press MUTE/DELETE on the handset to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P
appears).
5. Press
MENU/SELECT to move to the name. The screen displays Enter name.
6. Use the dialing keys to add or edit the name.
f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Ç
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT when done.