Quick Start Guide

17
Bluetooth
Bluetooth setup
Add a headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user’s manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU/
SELECT on the handset in idle mode.
2. Press CID or DIR to highlight Bluetooth, then press MENU/SELECT.
3. Press
CID or DIR to highlight Add BT headset, then press MENU/SELECT.
The handset displays Search headset....
4. Set your headset to discoverable mode (refer to the user’s manual of your
headset). When the screen displays the found devices, press
CID or DIR to
highlight your headset, if necessary, then press
MENU/SELECT.
When a device is successfully paired and connected, the corresponding status
icon (
2
) displays. The CELL 2 light on the telephone base turns on.
If you have trouble pairing your cell phone or headset, it may not be
compatible with your DL72210/DL72310/DL72340/DL72350. Check the
Bluetooth compatibility list at
https://telephones.att.com/bluetooth.