Quick Start Guide
16
Bluetooth
Bluetooth setup
To use a Bluetooth enabled cellular phone or headset with your telephone, you
ÀÈÆÇèÅÆÇô¼Å´Á·¶ÂÁÁ¸¶ÇÌÂÈſȸÇÂÂÇ»¶¸¿¿È¿´ÅûÂÁ¸ÂÅ»¸´·Æ¸Çʼǻǻ¸
telephone base. Then, the DL72210/DL72310/DL72340/DL72350 can be used
to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 15 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.
Add a cell phone
Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user’s manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
1. Choose a slot to pair the cell phone. Press and hold CELL 1 or CELL 2 on
the telephone base for about four seconds until the CELL 1 or CELL 2 light
ë´Æ»¸Æ
f If there is already a cell phone in the slot, the existing cell phone will be
erased from cell devices list.
2. Turn on the Bluetooth feature of your cell phone and search for or add new
·¸É¼¶¸Æ¨Á¶¸ÌÂÈŶ¸¿¿Ã»ÂÁ¸èÁ·ÆÌÂÈÅûÂÁ¸AT&T DECT 6.0), press
the appropriate key on your cell phone to continue the pairing process.
f All cell phones that are connected to the telephone base are disconnected
temporarily until the pairing process is complete.
When a device is successfully paired and connected, the corresponding status
icon (
1
or
2
) displays. The corresponding device light on the telephone base
(CELL 1 or CELL 2) turns on.