User's Manual

80
Smart call blocker
Call block settings
¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ
The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK on the handset when it is not in use,
and then press
MENU/SELECT to select SCB On/Off.
-OR-
Press MENU/
SELECT to enter the main menu when the
handset is not in use. Press TCID or SDIR to scroll to
Smart call blk, then press MENU/SELECT twice.
2. Press T
CID or SDIR to highlight On or Off, then press
MENU/SELECT to save the setting. You hear a confirmation
tone.
Control calls without numbers
Use this setting to control “out of area” or “Private” calls. You can choose to
allow or reject these calls directly. You can also choose to screen them with
or without learning the callers’ names before you decide whether to answer
or reject these calls. Moreover, you can forward these calls to the answering
system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the
handset is not in use. Press TCID or SDIR to scroll to Smart
call blk, then press MENU/SELECT.
2. Press T
CID or SDIR to scroll to Calls w/o num, then press
MENU/SELECT.
3. Press T
CID or SDIR to choose one of the following options,
then press MENU/SELECT.
f Screening - ask the caller to press the pound key (#)
or to say his/her name before the call rings on your
telephone.
f Allow - allow the calls to get through and ring.
f Answering sys - forward the calls to the answering
system without ringing.
f Block - reject the calls with block announcement.

Answering sys
>Smart call blk

Answering sys
>Smart call blk

>SCB On/Off
Block list
CALLS W/O NUM
>Screening

Star name list
>Calls w/o num