User's Manual

Telephone operation

Options while on calls

To transfer an outside call from the telephone base:

1. During the call, press MENU/

SELECT.

2. Press

MENU/SELECT, then press to TCID or SDIR choose

Transfer.

f If your have one handset and no other registered

devices, the outside call is put on hold and the

telephone base shows Transferring call.... The

handset rings and shows Transfer from BASE 0

(BASE represents the base name).

f If you have other registered device(s) or more than

one handset, the telephone base shows TRANSFER

TO:. Use the dialing keys to enter a specific handset

number (1-9 for handsets 1-9, TONE followed by

0-2 for handsets 10-12, or TONE followed by

for all handsets), or press

TCID or SDIR to scroll to the desired handset and press

MENU/SELECT. The outside call is put on hold and the telephone base

shows Transferring call... or Transferring call to all.... The other

handset(s) rings and shows Transfer from BASE 0 (BASE represents the

base name).

3. To answer the call on the destination handset, press

PHONE/FLASH or

/SPEAKER. The telephone base shows Call transferred and goes to

idle mode.

Notes:

f To cancel the transfer and return to the external call before the blind transfer call is answered, press OFF/CANCEL,

PHONE/FLASH or /SPEAKER on your handset, or CANCEL or /SPEAKER on your telephone base.

f If the other device does not answer the transfer within 30 seconds, the transfer ends and the initiating device rings

while showing No response to transfer. If it does not pick up within 30 seconds, the device returns to idle mode and the

outside call ends.

06:30

8/06

Speaker 0:00:12

>Transfer

Intercom

TRANSFER TO:

>HANDSET 2