User's Manual

Answering system
111
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
To change the remote access code:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
SELECT to
enter the main menu.
2. Press T
CID or SDIR to scroll to Answering sys, then press
MENU/SELECT.
3. Press T
CID or SDIR to scroll to Ans sys setup, then
press MENU/SELECT.
4. Press T
CID or SDIR to scroll to Remote code, then press
MENU/SELECT.
5. Use the dialing keys to enter a two-digit number. Press
MUTE/DELETE to backspace and delete a digit.
6. Press
MENU/SELECT to save the setting. You hear a
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
SELECT to enter the main menu.
2. Press T
CID or SDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press T
CID or SDIR to scroll to Ans sys setup, then
press MENU/SELECT.
4. Press T
CID or SDIR to scroll to Remote code, then
press MENU/SELECT.
5. Use the dialing keys to enter a two-digit number. Press
MUTE/DELETE to backspace and delete a digit.
6. Press
MENU/SELECT to save the setting. You hear a
confirmation tone.

REMOTE CODE
19

# of rings
>Remote code
S
T

Voice guide
>Ans sys setup
S
T

# of rings
>Remote code

Answer ON/OFF
>Ans sys setup

REMOTE CODE
19