User's Manual

Answering system

108

Answering system settings

Voice guide

This feature is an alternative way for you to do the basic

setup of the answering system. You can follow the voice

guide to record your own announcement, set the number

of rings, and set the message alert tone.

This feature is only available on the telephone base.

1. When the telephone base is in idle mode, press

MENU/

SELECT.

2. Press T

CID or SDIR to scroll to Answering sys, then

press MENU/SELECT.

3. Press T

CID or SDIR to scroll to Voice guide, then press

MENU/SELECT. You hear a voice prompt, “Hello! This

voice guide will assist you with the basic setup of your

answering system.“

4. Setup your answering system by inputting designated numbers, as

instructed in the voice guide.

Notes:

f You can press CANCEL to quit the voice guide at any time.

f If the system does not receive any input, it will play an alert message. If there is still no input, it will announce “Sorry, I

still have not received any input. If you want to restart the voice guide, please enter the menu and select Voice guide under

Answering system. Good bye.”

f After a power outage, the system prompts you to set the date and time. After the date and time setting is done or

skipped, the system prompts if you want to set up the answering system via voice guide. Press MENU/SELECT to start

the setup.

Play messages

>Answering sys

Answer ON/OFF

>Voice guide

Settingup Ans sys...