User's Manual

146

Answering system

Answering system settings

Number of rings

Youcansettheansweringsystemtoansweranincomingcallaertwo,three,

four,ve,orsixrings.Youcanalsoselecttollsaver,whichisexplainedbelow.By

default,theansweringsystemanswersanincomingcallaerfourrings.

To set the number of rings:

1. Press MENU in idle mode.

2. Press CID or DIR to highlight Answering sys, then press

SELECT.

3. Press CID or DIR to highlight Ans sys setup, then press

SELECT.

4. Press CID or DIR to highlight # of rings, then press

SELECT.

5. Press CID or DIR to choose from 6, 5, 4, 3, 2 or

Toll saver.

f Tollsaver-theansweringsystemanswersacallaer

tworingswhenyouhavenewmessages,oraerfour

rings when there are no new messages. This feature

allows you to check for new messages and avoid

paying long distance charges when calling from out

of your local area.

6. Press SELECT to save.Youhearaconrmationtone.

Notes:

f If you set the number of rings for the answering system as 2 or 3 rings, the caller ID announce feature may not have

enough time to announce the caller’s full information.

f If Smart call blocker is on, the rst ring of all calls will be muted.

ANSWERING SYS

Call screening

# of rings

Remote code

BACK SELECT

# OF RINGS

4

BACK SELECT

ANS SYS SETUP

Call screening

# of rings

Remote code

BACK

SELECT

# OF RINGS

4

BACK

SELECT