User's Manual

Multiple handset use

Push-to-talk (PTT)

Change a one-to-one PTT call to an intercom call

You can convert a one-to-one PTT session to an intercom call.

Using a handset or the telephone base:

When your device shows Press and hold [PTT] to talk, press INTCOM.

The screen shows Switch to Intercom?.

Press SELECT. Your device displays Calling BASE 0 or

Calling HANDSET X. The destination device briefly shows Push to

talk Ended and then HANDSET X is calling or BASE 0 is calling. The

destination device rings.

Press HOME/FLASH or any dialing keys (0-9, or TONE ) on the

destination handset, or press HOME or any dialing keys (0-9, or

TONE ) on the telephone base to answer the intercom call. Both

devices now show Intercom.

To end the intercom call, press OFF/CLEAR on your handset or place the

handset in the telephone base or charger, or press END on the telephone

base. Both screens show Intercom ended.

Answer an incoming call during a PTT call

When you receive an outside call during PTT, there is an alert tone.

Using a handset or the telephone base:

During a one-to-one PTT, press HOME/FLASH, CELL 1 or CELL 2 on

the initiating or destination handset, or press HOME, CELL 1 or CELL 2 on

the telephone base. The PTT call ends automatically and the outside call

is answered.

During a one-to-group PTT call, press HOME/FLASH, CELL 1 or

CELL 2 on the initiating handset, or press HOME, CELL 1 or CELL 2 on

the telephone base. The PTT call ends automatically and the outside call

is answered.

During a one-to-group PTT call, press HOME/FLASH, CELL 1 or

CELL 2

on any one of the destination handsets or telephone base. That

device answers the outside call. The PTT call continues for the rest of the

PTT participants.

To leave the PTT call without answering the incoming call, press

OFF/CLEAR on your handset or CANCEL on your telephone base. The

telephone continues to ring.

•