User's Manual

Multiple handset use
75
Push-to-talk (PTT)
You can directly broadcast messages to the speakerphone of any
device. Press and hold PUSH TO TALK on a handset or PTT/FLASH
on the telephone base to begin two-way communication.
Only one device can talk at a time. While talking to another
device, press and hold PUSH TO TALK on the handset or
PTT/FLASH on the telephone base.
You must release PUSH TO TALK on the handset or PTT/FLASH on
the telephone base, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices cannot use the
intercom feature but can access the answering system.
When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.
Turn PTT on or off
Using a cordless handset:
1. Press PUSH TO TALK when the handset is not in use. The
PUSH TO TALK menu displays.
2. Press
7
CID or
7
DIR to highlight PTT On/Off, then press
MENU/SELECT.
3. Press
7
CID or
7
DIR to choose On or Off, then press SELECT.
Using the telephone base:
1. Press PTT/FLASH when the telephone base is not in use. The
PUSH TO TALK menu displays.
2. Press TCALLER ID or SDIRECTORY to highlight PTT On/Off,
then press SELECT.
3. Press T
CALLER ID or SDIRECTORY to choose On or Off, then press SELECT.
NOTE: The handset or the telephone base screen displays No PTT call when PTT is
turned off.
•
•
•
•
•
PTT
SELECT
PUSH TO TALK
HANDSET 2
Group
PTT On/Off
BACK
BACK
SELECT
INCOMING PTT
On
Off
CK S