User's Manual

Multiple handset use
74
Call transfer using intercom
Using the telephone base:
1. During the call, press OPTION.
2. Press SELECT to choose Intercom.
If you have one handset and no other registered
devices, the handset shows Calling HANDSET.
If you have other registered device(s) or more than
one handset, the handset shows INTERCOM TO:.
Use the dialing keys to eenter a specific handset
number (1-9 for handsets 1-9, TONE followed by
0-2 for handsets 10-12, # for a single headset/
speakerphone, # followed by 1 or 2 for headset/
speakerphone 1 or 2, or TONE followed by
#
for
all devices), or presspress TCALLER ID or SDIRECTORY to
scroll to the desired device and press SELECT.
The call is automatically put on hold. Your handset screen shows Calling
HANDSET X or Calling all, The destination handset(s) rings and displays
BASE 0 is calling.
3. To answer the call on any destination handset, press HOME, CELL 1,
CELL 2 or any dialing key (0-9, TONE ). Both the handset and the
telephone base now show Intercom.
4. From this intercom call, you have the following options:
You can transfer the call. Press OPTION and then press SELECT to
select Transfer on the telephone base. The telephone base shows
Call transferred. The destination handset automatically connects to the
outside call.
You can let the handset join you on the outside call in a three-way
conversation. Press OPTION. Press TCALLER ID or SDIRECTORY to
highlight Share call, then press SELECT.
You can end the intercom call and continue the outside call on
the telephone base. Press CANCEL, END, CELL 1 or CELL 2 on the
telephone base. The destination handset shows Intercom ended.
NOTES:
To cancel the transfer call and return to the external call before the intercom call is
answered, press CANCEL on the telephone base.
If the other device does not answer the intercom call within 100 seconds, or if the device is
in use, on a call or out of range, the initiating device shows No answer. Try again and returns
to the outside call.
Answering sys
Directory
Caller ID log
Intercom
S
T
SELECT
BACK
INTERCOM TO:
HANDSET 1
HANDSET 2
All
S
T
SELECT
BACK