User's Manual
Multiple handset use
71
Intercom
Using the telephone base:
1. Press MENU in idle mode to enter the main menu.
Press TCALLER ID or SDIRECTORY to scroll to Intercom,
then press SELECT.
If you have one handset and no other registered
devices, the telephone base shows Calling
HANDSET X.
If you have other registered device(s) or more than
one handset, the telephone base shows INTERCOM
TO:. Use the dialing keys to eenter a specific handset
number (1-9 for handsets 1-9, TONE followed by
0-2 for handsets 10-12, or # for a single headset/speakerphone, #
followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed
by # for all devices), or presspress TCALLER ID or SDIRECTORY to scroll to the
desired handset and press SELECT. The telephone base shows Calling
HANDSET X or Calling all.
The destination handset(s) rings and shows Base is calling,
BASE 0 is calling or BASE 0 is calling all.
2. To answer the intercom call, press HOME, CELL 1, CELL 2 or any dialing
key (0-9, TONE ) on the telephone base. Both the base and the handset
now show Intercom.
3. To end the intercom call, one party presses END, OFF/CLEAR, or places
the handset back in the telephone base or charger; or presses END on the
telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display
Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
OFF/CLEARCLEAR on the
handset or END on the telephone base..
If the called party does not answered within 100 secon
ds, or if the devic
e is in use
, on a call or
out of range, the initiating device shows No answer. Try again.
To temporarily silence the intercom ringer, press
OFF/CLEAR or MUTE/DELETE on the
handset, or press CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
For cordless headsets and speakerphones, refer to the corresponding user’s manual on how
to answer and end an intercom call.
If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone
base, they appear as HEADSET 1 and HEADSET 2, respectively, in the intercom menu.
•
•
•
•
•
•
•
•
Answering sys
Directory
Caller ID log
Intercom
S
T
SELECT
BACK
INTERCOM TO:
HANDSET 1
HANDSET 2
All
S
T
SELECT
BACK