User's Manual

Telephone operation
52
Make, answer and end a call
Make, answer or end a cell call
The CLP99286/CLP99386/CLP99456/CLP99486/CLP99546/CLP99556/
CLP99586 can be used to make or answer calls on the cell line. You can
connect a maximum of 4 Bluetooth enabled cell phones to the telephone
base. Both cell phones can be used on cell calls at the same time.
Using a cordless handset:
To make a cell call:
Press CELL 1 or CELL 2 . Enter the telephone number, then press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2 .
To answer a cell call:
Press HOME/FLASH or /SPEAKER, CELL 1 , CELL 2 or any dialing
key (0-9 or TONE ).
To end a cell call:
Press
OFF/CLEAR, or put the handset in the telephone base or charger.
Using the telephone base:
To make a cell call:
1. Press CELL 1 or CELL 2, then enter the telephone number.
2. Press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE
).
To end a cell call:
Press CELL 1 or CELL 2.
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
If you do not want to answer the call, press REJECT .
When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed. Press
CONNECT to connect your cell phone to the telephone system. Refer to Bluetooth connection
from idle mode on page 25 and Connect/disconnect an active device on page 26.
•
•
•
•
•
•
•
•
•