User's Manual

Bluetooth
21
Bluetooth setup
To use a Bluetooth enabled cellular phone with your telephone, you must
first pair and connect your Bluetooth cellular phone with the telephone
base. Then, the CLP99286/CLP99386/CLP99456/CLP99486/CLP99546/
CLP99556/CLP99586 can be used to make or answer calls on the cell
phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.
Add a cell phone
Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user’s manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press TCALLER ID or SDIRECTORY to highlight Bluetooth,
then press SELECT.
3. Press SELECT to choose Add device.
4. Press SELECT to choose Add cellular. The screen
displays Please wait... followed by 1. If cell is
connected to BT device, please disconnect it.
If there are already 4 paired devices on the list, the
4th one on the list will be automatically removed,
regardless of whether the pairing of the new device
is successful or not.
If there are already 2 active devices on the list
with prefix D1: or D2:, the telephone base shows
Cell Phone A is deactivated for adding a new device.
5. Press NEXT. The screen displays 2. Place cell phone
next to base.
All devices that are connected to the telephone base are disconnected
until the pairing process completes.
•
•
•
BLUETOOTH
Add device
Device list
Download dir
S

T
SELECT
BACK
ADD DEVICE
Add cellular
Add headset
S

T
BACK SELECT
Set cell to
search base:
AT&T DECT 6.0
PIN:0000
Caller ID log
Intercom
Call block
Bluetooth
SELECT
BACK
S

T