User's Manual

105

Call block

Add a call block entry

Using the telephone base:

When the telephone is not in use, press MENU.

Press TCALLER ID or SDIRECTORY to scroll to Call block,

then press SELECT.

Press SELECT again to choose Block list.

Press TCALLER ID or SDIRECTORY to scroll to

Add new entry, then press SELECT.

When the screen displays ENTER NUMBER, use the

dialing keys to enter a number (up to 30 digits).

Press TCALLER ID or SDIRECTORY to move the cursor

to the left or right.

Press X/DELETE to erase a digit.

Press and hold X/DELETE to erase all digits.

Press and hold REDIAL/PAUSE to enter a three-

second dialing pause (a p appears).

-OR-

Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press

TCALLER ID or SDIRECTORY, or press REDIAL/PAUSE repeatedly to find the

desired number. Press SELECT to copy the number.

6. Press NEXT to move on to the name.

The display shows Number already saved if the number is already in

the call block list. You cannot save the same number twice.

7. When the screen displays ENTER NAME, use the dialing keys to enter

a name (up to 15 characters). Press a key repeatedly until the desired

character appears. The first character of every word is capitalized.

Press TCALLER ID or SDIRECTORY to move the cursor to the left or right.

Press 0 to add a space.

Press X/DELETE to erase a character.

Press and hold X/DELETE to erase all characters.

Press TONE to change the next letter to upper or lower case.

8. Press SAVE to store your call block entry.

•