User's Guide

Set Dial Mode*
This phone comes set for touch tone (DTMF) dialing. If you have dial pulse
(rotary) service, set the dial mode to PULSE.
1 Press S.
2 Press 11. The screen displays
3 Press S. The screen displays
4 Press S.
5 Press < or > to display DTMF or PULSE.
6 Press S to save displayed setting.
Set Flash Time
Some phone systems require longer or shorter tones when sending touch
tone signals. You can set the handsets to send a longer or shorter tone by
following the directions below. The default setting is LONG.
1 Press S, #.
2 Press 12. The screen displays
3 Press < or > to display LONG or SHORT.
4 Press S to save displayed setting.
FEATURE SETUP
10
>DIALING
FLASH TIME
>DIAL METHOD
FLASH TIME
>FLASH TIME
LONG
2230_book_1ATT 5/10/01 8:25 PM Page 10