User's Manual

• Make sure the unit is OFF and ensure no batteries remain inside the

unit.

• Locate the 3.5mm DC Jack on the back of the unit.

• Connect a power adaptor (not included) into the unit’s DC Jack.

• Insert the other end of the power adaptor into a plug socket.

• Turn the unit ON.

TRANSFORMER SAFETY NOTICE

• Using a 3.5mm/1.3mm (positive centre) 6V/800mA DC output AC

adaptor is recommended.

• This toy shall only be used with a transformer for toys.

• The transformer is not a toy.

• This toy is not intended for use by children under 3 years old.

• Do not connect the toy to more than the recommended number of

power supplies.

• Never clean a plugged-in toy with liquid.

• Please regularly examine the transformer, checking for damage to the

cord, plug, transformer or other parts. Do not use the transformer if it

is damaged.

MEMORY CARD INSTALLATION

KidiStar Dance is compatible with microSD/microSDHC memory cards

up to 32GB.

• Make sure the main unit is in Standby Mode.

• Locate the memory card slot inside

the battery compartment of the main

unit.

• Insert the memory card (not included)

as illustrated.

• To remove the memory card from the

slot, push the card once and it will

eject.

Note: To prevent accidental data loss,

make sure you have backed up all important data from your memory

card before using.