User's Manual

31
T
E
C
H
N
I
C
A
L
S
U
p
p
O
R
T
Files copied to the
tablet's internal memory
disappeared.
The tablet's memory
was not formatted to
FAT32.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
Cannot connect to Wi-Fi. TheWi-FiisOff. Go to Settings - Parent Settings
- to turn on Wi Fi.
The firmware of
the InnoTab
®
3S is
not up-to-date or
the tablet has not
been registered on
Learning Lodge
TM
.
Register your tablet on Learning
Lodge
TM
, and make sure the
firmware is the most up-to-date
version. For the instructions,
please see the Getting Started
With Wi-Fi section on page 8.
Wi-FiisOn,butthere
is no Wi-Fi network
available.
There is no Wi-Fi
network in your
location or network
signal is weak.
Move to a location that has an
available Wi-Fi network.
Wi-Fi network is
available, but the
connection failed.
The selected
network is not
configured properly
or authentication is
required.
Make sure the network is
configured properly and there
is no firewall blocking Internet
access. If a password is needed,
make sure the correct password
is entered with the appropriate
uppercase/lowercaseletters
indicated.
If your InnoTab
®
3S does not respond to an inserted cartridge, please carefully
try the following:
• Removeallbatteriesandunplugallwiring.
• Useacottonswabdippedinrubbingalcoholoranalcohol-basedwindow
cleaner to gently clean the contact area of the cartridge slot.
• Ifnecessary,dryallthecleancontactareaswithasoft,lint-freecloth.
• Pleasemakesurethatallpartsarecompletelydrybeforerestoringelectricity.
Static electricity may cause the InnoTab
®
3S to malfunction. In some cases,
the game play score stored in the tablet memory may be lost. In cases where
InnoTab
®
3S is malfunctioning due to static electricity, reset the tablet by
removing and reinstalling the batteries, or by unplugging and replugging
the AC adaptor. Or,if thestatic electricity malfunction occurredduring the
downloading process, disconnectthe USB cable, delete the corruptedfile,
andresetthetabletasdescribedabove.ThenreconnecttheUSBcableand
restart the download process.