User Manual

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Only the Zip Zap
TM
stylus should be used to write on the pad. If any
substance gets on the pad, wipe it with a tissue or damp cloth. Do
not scrub the surface as it could cause damage.
3. Avoid using excess pressure on the pad.
4. Keep the unit out of direct sunlight and away from any direct heat
sources.
5. Remove the batteries when the unit is not in use for an extended
period of time.
6. Do not drop the unit on a hard surface and do not expose the unit
to excess moisture.
TROUBLE SHOOTING
If for some reason the program/activity stops working, then please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la classe B est conforme a la norme NMB-003 du Canada.
Care / Maintenance & Troubleshooting
16