User's Manual

DATE OF ISSUE: 8-Jan-99 Page 22 of 24
DOC. NO.: C 3G 6011 UM 85 N 0000 001 1
VERSION 0.3 6011N 4-line Alphanumeric Display FLEX Pager User Manual
CIRKISYS ELECTRONICS LTD.
4. OTHER FEATURES
Back-lighting: In dim conditions, the pager’ s back-light makes the screen easy to read.
The back-light can be turned on by holding ‘ ■’ for 2 seconds. If no other keys are
pressed, the back-light turns off automatically and returns to standby mode.
Time Stamp Indication: A time stamp is shown at the last line of each message.
Real-time Clock: The pager can display the real-time clock when user press either ‘ ▲’
or ‘ ▼’ in standby mode.
Low Battery Indication: In case of low battery, the pager will alert user by vibrating or
generating a long beeping signal and display the ‘ Battery Low’ screen. Alert can be
stopped by pressing any key and the ‘ ’ icon will be displayed in the status screen to
remind user.
1. To replace the battery:
2. Turn off the pager.
3. Unlock and open the battery compartment door, pick out the old battery.
4. Place the new ‘ AAA’ size battery with correct polarity.
5. Close and lock the battery compartment door.
6. Hold ( ) for 2 seconds to turn on your pager.
NOTE: New battery must be put into the battery slot within 5 minutes, otherwise all
settings and messages in the memory banks will be lost.
Battery Backup: All settings and messages will be retained when the pager is turned off.
This feature also applies to the situation of battery replacement for up to 5 minutes.
Key Beep: A short beep is generated whenever a key is pressed to notify user. This
feature can be enabled or disabled by user.
Word Wrapping: When the word size exceeds the remaining displayable area of a row,
the whole word will automatically shift to the next row. This feature is only applicable to
the messages shown in small fonts.
Service Area Indication: When the pager is out of service area, ‘ ’ will be displayed
in the pager to indicate that it is temporarily not able to receive any message. ‘ ’ will
be disappeared when user returns to the service coverage area.