User's Manual

DATE OF ISSUE: 8-Jan-99 Page 17 of 24
DOC. NO.: C 3G 6011 UM 85 N 0000 001 1
VERSION 0.3 6011N 4-line Alphanumeric Display FLEX Pager User Manual
CIRKISYS ELECTRONICS LTD.
8. Press (■) to activate the setting.
‘ ’ icon will be displayed on the
right corner of the screen when
personal alarm has been set.
9. Note: ‘ ’ icon will not be displayed when the alarm time is over.
3.4.7 Setting News Message Alarm
User can set alarm in the news memory bank to remind him if there is any new
message received.
1. In the News Memory Bank, select
the news message that you want to
set alarm.
News message to set alarm
2. Repeat the steps of 3.4.6 to access
the sub-menu of “ MESSAGE
UTILITY” .
Message Utility sub-menu
3. Press ( ) to highlight “ NEWS
ALARM” and press ( ) to
enable the news alarm. ‘ ’ will
be displayed on screen when the
news alarm is being set.
News alarm has been set
4. To disable the news alarm, repeat the above steps such that the bell icon
‘ ’ is no longer display.
5. Note: ‘ ’ will not be displayed when the alarm time is over.
3.4.8 Setting Message Display Duration
1. In the main menu, press ( ) to
highlight “ DISPLAY SETUP”
and press ( ) to access the sub-
menu.
press ( )
Display Setup sub-menu screen
2. Press ( ) to highlight “ MSG
DISPLAY DURATION” and press
( ) to access the Duration Setup
screen.
press ( )