User's Manual

DATE OF ISSUE: 8-Jan-99 Page 15 of 24
DOC. NO.: C 3G 6011 UM 85 N 0000 001 1
VERSION 0.3 6011N 4-line Alphanumeric Display FLEX Pager User Manual
CIRKISYS ELECTRONICS LTD.
3.4.4 Setting Silent Timer
A built-in silent reception timer allows user to set a time range that no alert will
be generated when a message is being received.
1. In the “ ACCESSORIES” sub-
menu, press ( ) to highlight
“ SILLENT TIMER” and press
( ) to access the Silent Timer
Setup screen.
press ( )
Silent Timer Setup screen
2. Press ( or ) to enable ‘ ’ or
disable ‘ ’ the silent timer.
‘ ’ or ‘ ’
3. Press ( ) to switch between the
timer fields and press ( or ) to
adjust the silent on/off time.
press ( or ) to
adjust the silent time
4. Press (■) to activate the setting.
Either ‘ ’ or ‘ ’ icon will
be displayed on screen to indicate
different period of silent
reception mode.
‘ Silent reception period is not yet reached…’
or
‘ It is now the silent reception period…’
3.4.5 Setting Appointment Alarm
Two alarm clocks can be set in your pager. You can set each alarm to generate
either one-time ‘ ’ alarm or daily ‘ ’ alarm.
1. In the “ ACCESSORIES” sub-menu, press ( ) when “ APPOINTMENT
ALARM” is being highlighted to access the alarm setup screen.
2. Press ( or ) to select the alarm clock (either ‘ 1’ or ‘ 2’ or both), then
press ( ) to switch to the alarm mode field. Press ( or ) to enable
one-time ‘ ’ alarm or daily ‘ ’ alarm or disabled ‘ ’ the alarm.