GSM/GPS CAR ALARM SYSTEM User’s Manual Model: VC-366GSM&GPS, VC-398GGTBA, VC-390GGT,VC-390GGTB 1
z Product Assembly Listing 1. Mainframe x1 2. Remote Controllers, work frequency: 43.92Mhz x2 3. Dial up device, work frequency: 433.92Mhz x1 4. Vibration sensor box, tele-control receive inside, work frequency: 433.92Mhz x 1 5. Alarm x1 6. Microphone and voice speaker with cable x1 7. GPS Antenna: 3.3VDC x1 8. GSM Antenna: 900/1800Mhz x1 9. Relay, 14VDC/40A x1 10. 20 pin cable x1 11.
Thank you for the purchase of VTEC ELECTRONIC HK CO., LTD. GSM/GPS car alarm system. Before install the product, please kindly read this user manual. This product is suitable for indi vidual and corporation group car management z Remote control explanation Alarm on: Press the defense key once, door lock the anti-theft setting, speaker beep once, direction light flash once. Alarm off: Press the remove defense key once, doors unlock to release anti-theft, speaker beep twice, direction light flash twice.
z LED Status Direction ¾ Alarm off, LED, unlighted ¾ Learn or car repairing mode, LED, long time lighting ¾ Keep flashing for 4 times, stop for 2 seconds in the alarm on; there is no GPS signal ¾ Triggered in the alarm on, LED keeps flashing rapidly ¾ No GSM signal, keep flashing for 4 times, stop for 2 seconds ¾ Alarm on, GPS data success orientation, flashing twice and stop for 2 seconds ¾ Alarm on, vibration sensor been closed, flashing for 6 times and stop for 2 seconds ¾ Alarm off (LED does not shine
A、1、Activated car anti-theft mode”； operations succeed instruction: “Car locked and anti-theft activated. ” Mainframe will “bi” once, direction lights will flash once at the same time, car center control is locked; System is in the activated mode.
▲ After the selection of number 7 enter the second level functional operation in voice menu notice.
Attention: We are strongly recommended that phone reporting is more reliability cause SMS reporting is depends the country’s network signal. J、“Press star key (* )to return to the main menu” Press “*” key to return to the main menu System is setting the password or mobile phone no, entered and the instruction is: Please re-enter the setting no, if you have wrongly entered the password twice, you will hear the instruction: You have entered a wrong number, please re-enter. Please “#” key to end.
Our device has another fantastic function which can support Google Map. So, no matter you are the personal users or group users, you still can use our device to track your vehicle, even if you don’t have our group software. Google map will give you a good taste. Please log on to www.earth.google.com, download the Google Earth and then install on your computer or laptop. You have to set it to the individual user, sent it to “DW password” into the device.
messages through the voice notice, read the latitude first, then followed by the longitude ▲SMS reporting instruction: (SMS reporting content is just for the references, we are not guarantee that all the regions can do the SMS reporting due to the signal problem); Others version for the SMS reporting is in English version 1、 Alarm phone number change successful! 2、 System messages inquiry: Mainframe no, setting alarm phone number 1, setting alarm phone number 2, setting help number 1, setting help number 2
2 3 always, NC port the backside description after a concretely install, ought to the Center control close, signal function is to provide the phone long distance on/off car door output lock used/ for the customize 24V, system doesn't consist this Center control close, close function always, NO port 4 Center control open, open always, NC port 5 Center control open, signal output 6 Center control open, close always, NO port 7 Light direction control Separate connected to the car turnaround li
output/Outside connected relay 6 Yellow/Black Center control on, No 16 Blue Car door test/minus triggered Brown Connected to car 17 Orange Foot brake test 8 Brown turnaround lights 18 White ACC ON test 9 Pink Police report 19 Brown 20 Green 7 output/Police report received 10 Red Positive power supply, 12V z Center Control Lock Wiring Chart： 11
z Mainframe System Installation (This product is suit for 12V power supply car) Mainframe system installation position should be under the meter board or in the front seat shelter, make sure that the mainframe is under the fixed position, then let the GSM anti-theft exit line according to the wiring diagram, port description connect with the car ACC, direction lights, brake lights and also the power supply; Don't connect in the middle part of wire just for the convenient purpose.
3、 Finished the installation, you can’t call in the system phone, this is because the mainframe battery is in the charging way, you need to wait for one hour for re-test. If you still can’t call in the phone, please press 3 for phenomena checking. 4、 If the system can’t do the alarm called out; please check: (A) GSM antenna is in the right connecting way (B) New installation, wait for 1-2 hours for re-check (C) Please check the GSM Sim-Card balance (D) Please make sure the alarm no is right 5.
11. System can’t do SMS reporting, please checks the system anti-theft mainframe Sim-Card, does the SMS center no is correctly set, else please re-set by using another mobile phone. 12. Step on the brake but doors are not auto lock, please check does the foot brake is correctly connect, else, correct it.
