VT 8200 UC Headset User Manual
User Manual 1. WELCOME 3 2. VT 8200 OVERVIEW 4 2.1 STEREO 4 2.2 MONO 5 3. HOW TO WEAR 5 3.1 LEFT OR RIGHT WEARING STYLE 6 3.2 ADJUST THE HEADBAND 7 3.3 POSITION THE MICROPHONE 7 3.4 STORING THE MICROPHONE 8 4. HOW TO CONNECT 4.1 CONNECT TO PC (WITH CONTROLLER) 9 9 5. HOW TO USE 10 5.1 CALLS 10 5.2 BUSYLIGHT 11 6. SUPPORT 12 6.1 FAQ 12 6.2 HOW TO CARE FOR YOUR HEADSET 12 7.
1. WELCOME Thank you for using the VT 8200 Headset.
2. VT 8200 OVERVIEW 2.
2.
3. HOW TO WEAR 3.1 LEFT OR RIGHT WEARING STYLE The VT 8200 Duo can be worn on the left or right by rotating the microphone to the other side (280° limit).
3.2 ADJUST THE HEADBAND Adjust the headband to find the most comfortable fit. 3.3 POSITION THE MICROPHONE It is recommended to position the microphone close to your mouth.
The microphone can be worn either on your left or right side. 3.4 STORING THE MICROPHONE Discreet boom arm can fold neatly away into the headband when not on a call.
4. HOW TO CONNECT 4.1 CONNECT TO PC Plug the headset to a USB port on the PC.
5. HOW TO USE Volume up Mute microphone Answer/End button Volume down 5.
5.2 BUSYLIGHT The busylight indicator on the headset can protect you from all interruptions when you are busy. MANUALLY TURN BUSYLIGHT ON/OFF To manually activate the busylight on/off, tap the Answer/End button on the controller. The busylight can be activated even when you are not on a call.
6. SUPPORT 6.1 FAQ View the FAQs on www.Vbet.cn/VT 8200. 6.2 HOW TO CARE FOR YOUR HEADSET • Always store the headset with the power off and safely protected. • Avoid storage at extreme temperatures (above 25°C/77°F or below -20°C/-4°F). This may adversely affect the headset.
7. TECHNICAL SPECIFICATIONS VT 8200 HEADSET SPECIFICATION Headset weight: Mono headset 140g Stereo headset 188g Headset dimensions: Mono headset L196.3mm x W72.5mm x H189.1mm Stereo headset L196.3mm x W72.5mm x H191.1mm Controller dimensions: L75mm x W20mm Microphones: Noise cancelling microphone Speaker: 40mm Dynamic PureSound speakers (Hi-Fi) Speaker maximum input power: 10mW Speaker frequency range: 20Hz – 20KHz Cable length: Controller to PC: 1.
FCC Warning two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Made in China MODEL: VT 8200 Duo FCC ID: 2AC67-8200 Declaration of Conformity can be found on www.vbet.
