HomeSafe-Basic VT-PS99E User’s Manual PSTN Home Alarm System Page: 1 / 15
Table of Contents 1. Product Overview:.........................................................................................................................3 2. Main Functions & Features ..............................................................................................................3 3. For Your Safety ............................................................................................................................4 4. VT-PS99E Characteristics .....................................
1. Product Overview: VT-PS99E is a PSTN intelligent home alarm system. This LED display alarm system is equipped with PSTN technologies and suitable for both home and commercial use. It uses the PSTN landline networks with intelligent alarm system. It is a choice of stability, reliability, security, and user friendliness. Features are very practical, cost-effective, completed configuration and ease of use.
3. For Your Safety Read these simple guidelines. Not following them may be dangerous or illegal. Proper Connection Qualified Accessories Water Resistance Confidential Phone Number When connecting with other device, read carefully its manual so as to carry out correct installation. Do not connect it to other incompatible devices. Use only original parts and peripheral equipments to avoid damage to VT-PS99E. VT-PS99E is not water resistant. Keep it dry.
. Getting Started This section will describe how to set up your TEL99E. 5.1 Standard Package List TEL99E is supplied in a box which includes: 5.
5.
Antenna LINE1 LINE2 POWER SIREN ON OFF Wireless antenna Connect LINE1 to telephone uses telephone wire of standard package list Connect LINE2 to telephone out line Connect DC12V adapter uses power adapter of standard package list Connect siren uses siren of standard package list Power on battery or power off battery 5.5 Sensor Installation: Door sensor The door/window magnetic sensor has two parts.
In some circumstances the wired & wireless Infrared Fence detector is more appropriate than magnetic sensors.
Wired or wireless glass break detector: Wireless scroll steel door magnetic sensor: Install PIR motion sensor: A Passive Infra-red (PIR) Sensor is an electronic device that detects the motion or movement of some person or animal by sensing the heat emitted from the body.
Smoke/gas detectors: a) Wired or wireless smoke detector This smoke detector detects smoke by a couple of infrared diodes, which is suitable for detecting the smoke in house, shop, hotel, restaurant, office building, school, bank, library and storehouse etc. b) Wired or wireless gas detector The product is ceiling mounted gas detector with high stability. It is used for detecting leaking gas and suitable for the safety of residential house, villas, hotels, boarding house etc.
Wired alarm zones The alarm system have DC12V output, it can be used to supply the voltage for the wired sensors. The alarm system support two wired zones L1/L2 are the 2 wire alarm inputs. Note: The wired zone support NO/NC wired sensor. 6. Operation Instructions: the factory password is: 0000 - A long beep sound for all the proper operations - Two short sounds for wrong settings. 6.
Command: *20* Description: The siren feedback sound is off when you press remote control, only have buzzer sound. 6.10 Buzzer sound on/off: Command: *99* Command: *98* The buzzer sound: OFF The buzzer sound: ON. 6.11 Register and Delete remote controller/sensors: Register Remote controller: Command: *0* Description: After pressing *0* on the alarm panel keyboard, then press any button of the remote controller within 10 seconds. A long “Beep” sound means successfully.
6.13 Alarm event history: Command: x Description: x = (0-9) press key 0~9 to inquiry the latest 10 alarm events and display alarm defense area (0 means the most recent event). 6.14 Telephone line tampering detection: Command: *51* Description: the system will alarm when telephone lines disconnect or failure Command: *50* Description: the system will not detect telephone lines disconnection or fault. 7. Remote Controller (Key fob) Description 7.1.
11. Copyright and Disclaimer Copyright © 2014VT TECH Corp. All rights reserved. The user manual may be changed without prior notification. This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written authorization of VT TECH Corp., or transmitted in any form, either electronically or mechanically, including photocopying and recording.
12.
