HomeSafe-G VT-G992E User’s Manual GSM & PSTN Home Alarm System Page: 1 / 17
Table of Contents 1. Product Overview .........................................................................................................................3 2. Main Functions & Features ..............................................................................................................3 3. For Your Safety ............................................................................................................................4 4. VT-G992E Characteristics .....................................
1. Product Overview VT-G992E is a GSM and PSTN intelligent home alarm system. This LED display alarm system is equipped with dual network GSM & PSTN technologies and suitable for both home and commercial use. It uses advanced GSM technology, GSM Wireless mobile and traditional PSTN landline networks with intelligent alarm system. It has highly integrated digital voice, SMS, self-learning wireless communication code, and textmessaging technologies.
3. For Your Safety Read these simple guidelines. Not following them may be dangerous or illegal. Proper Connection Qualified Accessories Water Resistance Confidential Phone Number When connecting with other device, read carefully its manual so as to carry out correct installation. Do not connect it to other incompatible devices. Use only original parts and peripheral equipments to avoid damage to VT-G992E. VT-G992E is not water resistant. Keep it dry.
. Getting Started This section will describe how to set up your VT-G992E. 5.1 Standard Package List VT-G992E is supplied in a box which includes: 5.
5.
GSM Antenna Connector LINE1 LINE2 POWER SIREN ON OFF Wireless Antenna Connector Connect GSM antenna Connect LINE1 to telephone uses telephone wire of standard package list Connect LINE2 to telephone out line Connect DC12V adapter uses power adapter of standard package list Connect siren uses siren of standard package list Power on battery or power off battery Connect wireless antenna increase wireless distance Page: 7 / 17
External Speaker SP+ SPGND Wired zones L1 L2 OUT 12V Connect speaker anode Connect speaker negative Connect wired zones COM port / Output DC12V negative Wired zone 1, connect wired sensors NC or NO port Wired zone 2, connect wired sensors NC or NO port It is a can be programmed to control the output of the DC12V DC12V output, It can supply power for wired sensors 5.4 Connecting and Installation Read this manual before using your VT-G992E and check if all parts are included in the packaging box. 4.4.
4.4.2 Antenna Connection Connect the GSM antenna to VT-G992E Connect the Wireless antenna to VT-G992E. - GSM antenna is used to receive GSM signals. It should not be covered or shielded by any objects containing metal. 5.5 Sensor Installation: Door sensor The door/window magnetic sensor has two parts. The small part is the magnet to be mounted on the door and the others, the sensor is to be mounted on the frame of the door.
Wired or wireless glass break detector: Wireless scroll steel door magnetic sensor: Install PIR motion sensor: A Passive Infra-red (PIR) Sensor is an electronic device that detects the motion or movement of some person or animal by sensing the heat emitted from the body.
Smoke/gas detectors: a) Wired or wireless smoke detector This smoke detector detects smoke by a couple of infrared diodes, which is suitable for detecting the smoke in house, shop, hotel, restaurant, office building, school, bank, library and storehouse etc. b) Wired or wireless gas detector The product is ceiling mounted gas detector with high stability. It is used for detecting leaking gas and suitable for the safety of residential house, villas, hotels, boarding house etc.
Wired alarm zones The alarm system have DC12V output, it can be used to supply the voltage for the wired sensors. The alarm system support two wired zones L1/L2 are the 2 wire alarm inputs. Note: The wired zone support NO/NC wired sensor. 6. Operation Instructions: the factory password is: 0000 6.1 Keyboard setting: - A long beep sound for all the proper operations - Two short sounds for wrong settings. 6.1.
6.1.9 Siren sound feedback when using the remote control: Command: *21* Description: The siren will have a short feedback sound when you press remote control Command: *20* Description: The siren feedback sound is off when you press remote control, only have buzzer sound. 6.1.10 Voice reminder function on/off and buzzer sound on/off: Command: *041* The voice reminder function: OFF Command: *040* The voice reminder function: ON Command: *99* The buzzer sound: OFF Command: *98* The buzzer sound: ON. 6.1.
6.1.14 Zone mode settings: Command: #8xxA# Description: xx = 00-99 (zone number); A= zone mode (0-7) 8 modes 0: Bypass mode: The selected zone is disabled at all time 1: Common mode: The selected zone is active when the system is arming 2: Intelligent mode: The selected zone is disable when system INTELLIGENT ARMING 3. Emergency mode: The selected zone is active at all time even the system is not arming i.e; Smoke, Gas, Heat, Emergency panic sensors, … 4.
Command: #08HHMMA# Alarm disarming timer Description HH = hour (0-23) , MM= minute (0-59); Ex: *071830*, means set up 18:30 A = 0-9: 9 group of alarm timing can be programmed: 0 = disable arming timer; group 1 to group 5 timer can be used repeatedly, group 6 to group 9 timer can be used only one time; Ex: #0800000# all timer off. Command: #09HHMMA# Description: “HH” means hour(2-degits), “MM” means Minute(2-degites), the hour is 24 clock.
7. Remote Controller (Key fob) Description 7.1. Set up Arm Press “ ”button on the remote controller, and the LED display “SF”, means system “Armed”. 7.2 Set up Disarm Press “ ” button on the remote controller, and the LED display “CF”, means system “Disarmed”. 7.3. Emergency Alarm Press “ ”button on the remote controller for emergency help, And the LED display “99”. Press“ ”button on the remote controller one time is silent alarm, while press “ ”button twice or long time the siren will sound. 7.4.
9. Remote Control the system: You can use any telephone to dial the numbers of the system and it will put on automatically get through after system detecting the ring times you have been setup.
