User guide

vSync924 & 1624i User Guide © vSync DVR December 2007
Rev A. December 2007
Specifications and content are subject to change without notice.
31
NETWORK PASSWORD
Sets the network client connect password. The DVR prompts for the
entire process of setting up a network password.
The numbers 1, 2, 3 and 4 can be input by using direction keys UP,
RIGHT, DOWN, and LEFT, respectively.
The keypad can be used to input all characters from 0 – 9.
The default user ID is “root” and the default password is “1111”.
3-7. Setup – Network Mode
- Configures network parameters used for remote clients that connect to the DVR over a network or other
network features.
Navigate through menu items using the Up/Down buttons. Change the values using the Left/Right buttons.
If you do not understand the following settings, consult your network administrator.
Figure 3.7.1. Network Setup Screen
Table 3.7.1. Menu Items in Network Set-up Setup Screen
Item Description
PORT
RTSP port number
HTTP PORT
HTTP Port number