User guide
vSync924 & 1624i User Guide © vSync DVR December 2007
Rev A. December 2007
Specifications and content are subject to change without notice.
29
Figure 3.5.4.Set Date & Time Setup Screen
Table 3.5.4. Menu Items in Date & Time Setup
SET DATE&TIME
Warning! Changing this setting initiates a system reboot. Set date and
time. After changing, press the SEL button and select CONFIRM.
DAYLIGHT
SAVINGS
Configures automatic adjustment for Daylight Savings Time.
Use the LEFT or RIGHT buttons to enable/disable.
After selecting ON, move the cursor to the BEGIN (MM/DD/HH) field.
Press the SELECT button to set the DLS start time. Scroll to the END
(MM/DD/HH) field.
Set the DLS stop time by using the UP or DOWN buttons.
CAUTION : PLEASE NOTE TO PREVENT ERRORS
-DLS can’t start from 23:00.
-The BEGIN DATE and END DATE CANNOT be the same.