Specifications

Processing FPGA 87
Dedicated Processing FPGA memory
When you purchase a Matrox Solios with a Processing FPGA, the board also comes
with the following memory, which can only be accessed through the Processing
FPGA:
• 64/128/256 Mbytes of DDR SDRAM at 1.33 Gbytes/sec (2 x 64 bits x
83.3 MHz).
• 4/8 Mbytes of QDRII SRAM at 666 Mbytes/sec input, and 666 Mbytes/sec
output (2 x 32 bits x 83.3 MHz, in each direction).
Although the board comes with dedicated Processing FPGA memory, the
Processing FPGA can also access acquisition memory through its high-speed serial
interface.
Debugging
To interface with the Processing FPGA for debugging and probing internal signals,
Matrox Solios boards purchased with the Processing FPGA feature a 10-pin male
JTAG connector. For further details on the JTAG connector, see the section JTAG
connector in Appendix B: Technical information.