Specifications

64 Chapter 4: Matrox Solios hardware reference
Matrox Solios eCL/XCL dual-Base/single-Medium in dual-Base mode has
auxiliary/camera control signals in the following formats:
Matrox Solios eCL/XCL dual-Base/single-Medium in single-Medium mode and
Matrox Solios eCL/XCL-F have auxiliary/camera control signals in the following
formats:
Note that the opto-isolated signals pass through an opto-coupler, a device that
protects the board from outside surges and different ground levels, and allows the
frame grabber to be totally isolated.
You can set up the auxiliary signals in the DCF. Alternatively, for most commonly
used functionalities, you can configure the auxiliary signals using the MIL-Lite
function MdigControl() (for example, with M_IO...
*
, M_GRAB_TRIGGER...,
or M_TIMER...
*
).
Auxiliary signals # per path # total
LVDS camera control output signals. 4 8
TTL auxiliary input or output signals. 2 (+2 depending on type of signal) 6
Opto-isolated auxiliary input signals. depends on type (2 reserved for P0, 2 not specified) 4
LVDS auxiliary input signals. depends on type (2 reserved for P0, 2 not specified) 4
LVDS auxiliary output signals. 2 4
Auxiliary signals # total
LVDS camera control output signals. 4
TTL auxiliary input or output signals. 4
Opto-isolated auxiliary input signals. 4
LVDS auxiliary input signals. 4
LVDS auxiliary output signals. 2
*. As of MIL 10.