Specifications

Installing an adapter board/bracket 31
Matrox Solios board and the cable in this position, only the connector on one end
of the cable will latch properly onto the internal auxiliary I/O connector. The
other end will not and excessive force might damage the cable connector.
In addition, you should hear a snap when the hooks of the cable’s connector latch
onto the internal auxiliary I/O connector.
4. For the adapter boards of Matrox Solios eCL/XCL and eA/XA, connect the other
end of the flat ribbon cable to the internal auxiliary I/O connector of the adapter
board. Position the connectors so that their triangular etchings face each other.
The etchings indicate the location of pin 1.