Specifications

134 Appendix B: Technical information
8 P1_RS232_TxD RS-232 serial output from acq. path 1 (UART) to video
source.
10+, 9- P1_LVDS/TTL_CHSYNC_IO CSYNC input or HSYNC input/output for acq. path 1.
11 GND Ground.
13+, 12- P0_LVDS/TTL_CHSYNC_IO CSYNC input or HSYNC input/output for acq. path 0.
14 P0_TTL_AUX(TRIG)_IN M_AUX_IO1 M_DEV0 TTL auxiliary signal (input) for acquisition path 0, which
supports: trigger input (trigger controller 0 on acq path 0),
field polarity input, or user input.
15 GND Ground.
16 P0_RS232_TxD RS-232 serial output from acq. path 0 (UART) to video
source.
18+,17- P1_LVDS/TTL_CLK_IO Clock input/output for acq. path 1.
19 GND Ground.
21+, 20- P0_LVDS/TTL_CLK_IO Clock input/output for acq. path 0.
22 P1_TTL_AUX(TRIG)_IN M_AUX_IO1 M_DEV1 TTL auxiliary signal (input) for acquisition path 1, which
supports: trigger input (trigger controller 0 on acq path 1),
field polarity input, or user input.
23 P0_TTL_AUX(EXP)_OUT M_AUX_IO12 M_DEV0 TTL auxiliary signal (output) for acquisition path 0, which
supports: timer output (M_TIMER1 on M_DEV0) or user
output (M_USER_BIT2).
24 P0_RS232_RxD RS-232 serial input to acq. path 0 of frame grabber
(UART).
C1 P0_VID_IN_A Video input A for acq. path 0 (AC/DC).
C2 P1_VID_IN_A Video input A for acq. path 1 (AC/DC).
C3 P2_VID_IN_A Video input A for acq. path 2 (AC/DC).
C4 P3_VID_IN_A Video input A for acq. path 3 (AC/DC).
C5 GND Ground.
C6 GND Ground.
M1 GND Ground.
M2 GND Ground.
*. Note that only signals defined for acquisition path 0 (those that begin with P0) and the grounds (GND) apply to the Matrox Solios eA/XA Single
board. Only signals defined for acquisition paths 0 and 1 (P0 and P1) and the grounds (GND) apply to the Matrox Solios eA/XA Dual.
†. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became rep-
resented by M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL
versions and MIL 10, see MilSoliosAnalogIOConversionTable within MIL Release Notes.
Pin
Hardware signal name
*
MIL constant for
auxiliary signal
†
Digitizer
device
number for
auxiliary
signal
Description