Specifications

130 Appendix B: Technical information
A18 TTL_AUX_IO_1 M_AUX_IO3 M_DEV0/
M_DEV1
TTL auxiliary signal (input/output), shared between both acqui-
sition paths for trigger input (trigger controller 3 on acq path 0; 3
on acq path 1), user input, or user output (M_USER_BIT5), and
dedicated to acquisition path 1 for timer output (M_TIMER2 on
M_DEV1).
A19, B19 P0_LVDS_CLK_OUT Clock output for acq. path 0.
A20 GND Ground.
A21, B20 P1_LVDS_CLK_OUT Clock output for acq. path 1.
B3 GND Ground.
B6 TTL_AUX_IO_0 M_AUX_IO2 M_DEV0/
M_DEV1
TTL auxiliary signal (input/output), shared between both acqui-
sition paths for trigger input (trigger controller 2 on acq path 0; 2
on acq path 1), user input, user output (M_USER_BIT4), and
dedicated to acquisition path 0 for timer output (M_TIMER2 on
M_DEV0).
B7 GND Ground.
B8 P1_TTL_AUX_IO_1 M_AUX_IO9 M_DEV1 TTL auxiliary signal (input/output) for acquisition path 1, which
supports: timer output (M_TIMER1 on M_DEV1), trigger input
(trigger controller 1 on acq path 1), user input, or user output
(M_USER_BIT3).
B12 GND Ground.
B18 GND Ground.
B21 GND Ground.
B22, A22 P0_OPTO_AUX_IN0 M_AUX_IO6 M_DEV0 Opto-isolated auxiliary signal (input) for acquisition path 0,
which supports: trigger input (trigger controller 0 on acq path
0), user input, or field polarity input.
B23, A23 P0_OPTO_AUX_IN1 M_AUX_IO7 M_DEV0 Opto-isolated auxiliary signal (input) for acquisition path 0,
which supports: trigger input (trigger controller 1 on acq path 0)
or user input.
B24, A24 OPTO_AUX_IN0 M_AUX_IO0 M_DEV0/
M_DEV1
Opto-isolated auxiliary signal (input), shared between both
acquisition paths for trigger input (trigger controller 2 on acq
path 0; 2 or 0 on acq path 1) or user input, and dedicated to
acquisition path 1 for field polarity input.
B25, A25 OPTO_AUX_IN1 M_AUX_IO1 M_DEV0/
M_DEV1
Opto-isolated auxiliary signal (input), shared between both
acquisition paths for trigger input (trigger controller 3 on acq
path 0; 3 or 1 on acq path 1) or user input.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became rep-
resented by M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL
versions and MIL 10, see MILSoliosCameraLinkIOConversionTable within MIL Release Notes.
Pin Hardware signal name MIL constant for
auxiliary signal
*
Digitizer
device
number for
auxiliary
signal
Description