Specifications

122 Appendix B: Technical information
12+,25- X0 Video input data X0.
13 Inner shield Ground.
14 Inner shield Ground.
15+,2- CC4 M_CC_IO4 Camera control output 4 for acquisition path 0, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEV0), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output,
or rerouting of specific auxiliary input signals
†
.
17+,4- CC2 M_CC_IO2 Camera control output 2 for acquisition path 0, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEV0), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output,
or rerouting of specific auxiliary input signals
†
.
20+,7- SerTC Serial port to video source (UART).
26 Inner shield Ground, or for PoCL cables, +12 V.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_CCn became represented by
M_CC_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL versions and
MIL 10, see MILSoliosCameraLinkIOConversionTable within MIL Release Notes.
†. See the table in the Camera control and auxiliary signals section of Chapter 4: Matrox Radient eCL hardware reference for more information on
which auxiliary input signals (or auxiliary I/O signals set to input) can be rerouted onto the camera control output signals.
Pin Hardware
signal name
MIL constant
for auxiliary
signal
*
Description