Specifications

116 Appendix B: Technical information
Camera Link video input connector
The Camera Link video input connector is a 26-pin high-density mini D ribbon
(MDR) connector. It is used to receive video input, timing, and synchronization
signals and transmit/receive communication signals between the video source and
the frame grabber. The pinout of this connector follows the Camera Link standard.
1
14
13
26
Pin Hardware
signal name
MIL constant
for auxiliary
signal
*
Description
1 Inner shield Ground, or for PoCL cables, +12 V.
3+,16- CC3 M_CC_IO3 Camera control output 3 for acquisition path 0, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEV0), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output, or
rerouting of specific auxiliary input signals
†
.
5+,18- CC1 M_CC_IO1 Camera control output 1 for acquisition path 0, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEV0), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output, or
rerouting of specific auxiliary input signals
†
.
6+,19- SerTFG Serial port to frame grabber (UART).
8+,21- X3 Video input data X3.
9+,22- Xclk Clock input X.
10+,23- X2 Video input data X2.
11+,24- X1 Video input data X1.
12+,25- X0 Video input data X0.
13 Inner shield Ground.
14 Inner shield Ground.
15+,2- CC4 M_CC_IO4 Camera control output 4 for acquisition path 0, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEV0), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output, or
rerouting of specific auxiliary input signals
†
.