Specifications

Electrical specifications 107
Electrical specifications
Matrox Solios eCL/XCL-B (starting from version 000)
Operating voltage and
current (eCL-B)
Typical: 3.3 V, 1 A: 3.3 W
Max. PoCL 12.0 V, 0.333 A: 4.0 W
*
(Current directly drawn from the slot. Power is not dissipated by the board; it is
only used by the camera).
Total dissipated by the board: 3.3 W
Total dissipated by the board and PoCL video sources = 3.3 W + 4.0 W = 7.3 W
Operating voltage and
current (XCL-B)
Typical: 3.3 V, 0 A: 0 W
Typical: 5.0 V, 0.67 A: 3.35 W
Max. PoCL 12.0 V, 0.333 A: 4.0 W
*
(Current directly drawn from the slot. Power is not dissipated by the board; it is
only used by the camera).
Total dissipated by the board: 3.35 W
Total dissipated by the board and PoCL video sources = 3.35 W + 4.0 W = 7.35 W
I/O Specifications
Input signals in
LVDS format
100 Ohm differential termination.
Input current: -10 μA (min) to +10 μA (max).
Input voltage:
• common-mode: 0.1 V (min) to 2.3 V (max).
• differential threshold: low of -100 mV (min); high of 100 mV (max).
The following specification applies to the 5 V tolerant LVDS receiver for the rotary encoder
†
:
100 Ohm differential termination.
Input current: -75 μA (min) to +40 μA (max).
Input voltage:
• common-mode: -4 V (min) to 5 V (max).
• differential threshold: low of 100 mV (min); high of 3 V (max).
Output signals in
LVDS format
No termination.
Output current (loaded 100 Ohm): 20 mA (typ).
Output voltage (loaded 100 Ohm):
• differential: 250 mV (min) to 450 mV (max).
• common-mode: 1.125 V (min) to 1.375 V (max).
• low: 1.02 V (typ), 0.9 V (min); high: 1.33 V (typ), 1.6 V (max).
Input signals in
TTL format
No termination.
Pulled up to 3.3 V with 4.716 k ohm.
Clamped to -0.7 V and to 5.7 V.
Input current: 1 μA (max).
Input voltage threshold: low of 0.8 V (max); high of 2.0 V (min).