Specifications

Board summary 105
• One to four independent acquisition paths, depending on the board. Each
acquisition path has the following:
- Input from one of two software selectable sources. The sources are AC coupled.
- Two low-pass filters with cut-offs at 33 MHz and a 7.5 MHz, respectively.
- Variable gain amplifier and adjustable offset to set the black and white reference
levels.
- 10-bit A/D with a 65 MHz sampling rate.
- An LVDS/TTL pixel clock input/output.
- An LVDS/TTL CSYNC input or HSYNC input/output.
- An LVDS/TTL VSYNC input/output.
- A TTL auxiliary input signal (trigger input, field polarity input, or user input).
See the Matrox Solios hardware reference chapter for supported configurations.
- A TTL auxiliary output signal (timer output or user output). See the Matrox
Solios hardware reference chapter for supported configurations.
- Two TTL/LVDS auxiliary output signals (timer output, synchronization
output, or user output). See the Matrox Solios hardware reference chapter for
supported configurations.
- An opto-isolated auxiliary input signal (trigger input or user input). See the
Matrox Solios hardware reference chapter for supported configurations.
- RS-232 serial port.
-Bi-color status LED.
• One, two, or four 1024 entry 8- or 16-bit programmable LUTs, depending on
the board.