Specifications

100 Appendix B: Technical information
• Supports an external rotary encoder with quadrature output.
*
All Matrox Solios
eCL/XCL
†
boards support 5 V tolerant rotary encoders, except for the
standard-speed Matrox Solios XCL dual-Base/single-Medium board (66 MHz),
which supports 3.3 V tolerant rotary encoders.
Features specific to Matrox Solios eCL/XCL-B
• Supports a single video source in the Camera Link Base configuration. It can be
a power-over Camera Link (PoCL) video source. The PoCL protection on-board
fuse can sustain a current of 0.4 A at up to 45°C.
• The programmable LUTs can be operated in the following configurations
‡
:
- 8 palettes of one, two, or three 256-entry 8-bit LUTs.
- 4 palettes of one or two 1024-entry 8- or 16-bit LUTs.
- 1 palette of one or two 4096-entry 8- or 16-bit LUTs.
• 32/64/128 Mbytes of 100 MHz DDR SDRAM used as acquisition memory.
800 Mbytes/sec of memory bandwidth.
• Separate LVDS pixel clock, HSYNC, and VSYNC outputs.
• Three TTL auxiliary I/O signals (trigger input, field polarity input, user input,
user output, or timer output). See the Matrox Solios hardware reference chapter for
supported configurations.
• One LVDS auxiliary output signal (timer output or user output). See the Matrox
Solios hardware reference chapter for supported configurations.
*. For the standard Camera Link speed Matrox Solios XCL dual-Base/single-Medium
boards (66 MHz), starting from version 100.
†. For Matrox Solios eCL/XCL-F SOL6MFCF* and SOL6MFCFE*, starting from ver-
sions 205 and 206, respectively. For Matrox Solios eCL dual-Base/single-Medium
SOL6MCLE*, SOL6MFCE*, and SOL6MFCE30546*, starting from versions 200,
101, and 100, respectively. For Matrox Solios XCL dual-Base/single-Medium
SOL6MFC* and SOL6MFC30546*, starting from versions 103 and 100, respec-
tively.
‡. For example, two 1024-entry 8-bit LUTs can map 2-tap 10-bit data to 8-bit values. In
addition one 1024-entry 8-bit LUT can map 1-tap 10-bit data to 8-bit values.