User guide

vSync412i User Guide © vSync DVR December 2007
Rev A. December 2007
Specifications and content are subject to change without notice.
28
3-8. Setup - Storage Mode
-Configures the hard disk record mode, or initiates a hard disk format.
Navigate through menu items using the Up/Down buttons. Change the values using the Left/Right buttons.
Figure 3.8.1. Storage Setup Screen
Table 3.8.1. Menus in Storage Setup
Item Description
OVERWRITE
When enabled, the DVR will continue recording and overwrite the
oldest existing recorded data once the hard drive is full.
When disabled, recording will stop once the hard drive is full.
FORMAT
Formats the hard disk drive.