Specifications

- 60 -
Velocity
This value is used to change the dynamics of a MIDI or Drum Part. The value in
this field is added to the velocity of each note message that is sent out from the Part.
A positive value means that the resulting volume is raised and a negative that it is
lowered. The range is –127 to +127 and 0 is of course no change.
• You may enter a Velocity value directly from the computer keyboard, by
typing [Shift]-[V] and entering a value.
● Not all instruments handle the velocity range identically. A certain value
might lead to more drastic changes on one instrument than on another.
Delay
This is used to delay a MIDI or Drum Part relative to other Parts. The values repre-
sent 1 tick (fraction of a beat; there are 384 ticks per beat). The range is –127 to
+127. The negative values put the Part ahead of the other Parts. Use this feature to
adjust the feel of a Part or Track or to compensate for "slow reactions" in a MIDI
instrument.
● Notes that wind up either before the beginning (1. 1. 0) or outside a set Cycle,
due to delay settings, are not played.
• You may enter a Delay value directly from the computer keyboard, by
typing [Shift]-[D] and entering a value.
Length
This value adjusts the lengths of all notes in a Drum or MIDI Part. The range is Off
and 25% to 200%. 200% means that all notes get double the length of the recorded.
25% means they get a quarter of their actual length.