Specifications

- 390 -
Switching between Meter and Time based Display
Normally, the meter ruler will be linear, that is, there will be equal distance between
all bars on the screen. If there are tempo changes, the time ruler will be non-linear
to match. If you watch the accelerando below you will see that the meter ruler is
linear but the tick marks on the timing ruler get more and spread apart as the tempo
increases.
There will be cases where you want the Meter ruler to be linear and the Time ruler
to adapt to this, and there will be cases where you want the opposite (for example
when working with film or video). For this purpose, the display can be switched,
using one of the buttons on the Status Bar.
Meter Linear Time Linear
After switching, you may have to change the horizontal magnification of the win-
dow to make the window show the range you are interested in.