Specifications

- 115 -
Setting the Position for the first note
To set the position where you want the first note to appear, adjust the regular Song
Position (for example on the Transport Bar) and the Step Position is automatically
set to the same value.
Selecting a Track for input
If you are editing several Tracks at the same time, you must decide which Track to
enter notes into by making a Part/Track active (see page 94).
Entering notes and chords
1. Play one key or a chord.
If you just played one key it appears as soon as you release it. If you play a
chord it appears when you release the last key. In either case, the velocity you
played is recorded with the note.
No matter how long you hold down the key, the note will get the length set in
the Quantize box.
2. The Step Position has now advanced one Snap value.
3. Enter the notes for the next position.
1. Start by setting the Step
Position
2. Press and release the first
key.The note appears and the Step
Position box advances one step.
3. Press and release a chord.
It appears and the Step
Position advances again.