Specifications

Pro Tools III — Optional Digidesign Software
Note: A qualified external diskette drive is required for most software
installations when used with a Blue & White G3 or G4s. Exceptions are
pointed out below.
● Bruno/Reso v1.1.1
● DINR v3.3.1
● DigiTranslator v1.0: Requires 128 MB RAM. Does not require
Digidesign Hardware.
● DPP-1 v1.6.1
● D-Fi v1.4.1
● D-fx v1.2.1
● D-Verb v1.7.1
● Focusrite d2 v1.5.1
● Focusrite d3 v1.3.1
● MachineControl v1.0.1: Use of MachineControl with Blue & White
G3 or G4 requires a GeeThree Stealth Port Modem-to-Serial port
converter with driver v1.0.3 or higher OR the Keyspan USB-to-
Serial Adapter USA-28x with driver v1.6 or higher. When using the
USA-28x the "Printer Port Emulation" option in the Keyspan control
panel must be disabled. Keyspan firmware updates are available
at:
http://www.keyspan.com/downloads/
● MasterList CD v2.3
● Maxim v1.2.1
● MP3 Export Option v1.0: does not require a floppy drive
● PostConform v2.0
● SampleCell Editor v2.1.1 (w/ SampleCell II Plus)
● SampleCell-TDM v1.1.1 (w/ TDM Module), does not require a
floppy drive
● Sound Designer II v2.8.3: Does not support the use of Sound