Specifications

Expansion Chassis Information - Pro Tools III
● SBS (Bit3) 7-Slot model 2101-00-2 (must use IBM PCI 2.1
compliant Bridge chips, with host card that starts with 20-101)
● Magma 7-Slot model PXB-7-RMD
For further information about these products, please contact your
Digidesign dealer or local Digidesign office and ask for the Digidesign
Development Partner Catalog.
Expansion Chassis Requirements
● Requires 2 or 4 ft Expansion Chassis cable - 6 ft cables not
supported
● When used with G3 or G4 computers the Chassis is required to
have PCI 2.1 compliant bridge chips
For more information about expansion chassis setup and card order
configurations please download the Expanded Systems Guide PDF. For
updated slot order information with the latest Digidesign and Magma 13-
slot chassis download this PDF.
Digidesign Card Requirements:
● DSP Farm cards: must be Rev H or higher (serial number FF09226
or higher) for compatibility with Expansion Chassis.
● SampleCell II cards: must be Rev D or higher (serial number
HH02001 or higher) for compatibility with Expansion Chassis.
Customers with older cards should contact their local Digidesign office.
Digidesign Compatibility Documents Index