Specifications

Other Digidesign PCI Card Options - Pro Tools III
DSP Farm - PCI*: DSP Farms with serial numbers lower than FG10501
may be used for Plug-In operation but do not support connection of an
Audio Interface.
SampleCell II Plus
SampleCell II - PCI*
SampleCell II TDM Module - PCI
*Incompatibility with Disk I/O, older DSP Farms and SampleCell II Cards &
The Blue & White G3 and G4:
A rev "QC" or later of the AMCC chip is required for Blue & White G3 and
G4 compatibility. This rev number appears on the AMCC chip following
number "5933". Older versions can cause your computer to hang while
booting or when launching Pro Tools or DigiTest. QC or higher chip is
required for compatibility with the PCI 2.1 spec. Ways to identify these
boards are in the grid below:
Board
S/N's
Below
Manufactured
Before
Board
Rev
Before
DSP Farm I -
PCI
FF09226 7/9/97 Rev H
Disk I/O - PCI FD06201 6/11/97 Rev D
SampleCell II -
PCI
HH02001 5/20/97 Rev D
If a customer has previously updated their board (or received a
refurbished card), the serial number will remain the same, but the board
rev will be updated (and the AMCC chip will have "QC" or later). Cards
with the rev "Q" chip can be upgraded, please contact Digidesign directly
to arrange this.
Digidesign Compatibility Documents Index