Specifications

Pro Tools III PCI System for Power
Macintosh
Compatibility information for Pro Tools TDM v5.0.1 only.
Pro Tools v5.1 does not support Pro Tools III hardware.
Digidesign PCI Cards Supplied
with System
● Disk I/O - PCI
● DSP Farm - PCI
Other Card Options
Digidesign Audio Interfaces
(one required)
● 888|24 I/O
● 888 I/O
● 882|20 I/O
● 882 I/O
● ADAT Bridge I/O (16-bit
model)
Digidesign Software
● Pro Tools 5.0.1
Optional Digidesign Hardware
● ProControl
● Fader Pack (up to 3)
● Video Slave Driver
● Universal Slave Driver
● SMPTE Slave Driver
(Discontinued)
Supported Optional Expansion
Chassis
Third-Party MIDI Controllers &
Interfaces
Third-Party Video Capture
Cards
Supported CPU Models,
Speeds & Requirements*
● Power Macintosh G4
(AGP Graphics)
● Power Macintosh G4 (PCI
Graphics)
● Power Macintosh Blue &
White G3
● Power Macintosh Beige
G3
● Power Macintosh 9500 or
9600
Additional Computer
Requirements
System Software: Mac OS v8.6 or
v9.0
Total System RAM:
● 128 MB minimum
● Pro Tools application &
DAE "Preferred" memory
allocations both set to 30
MB
● Additional RAM required
for simultaneous use with
MIDI sequencers
● Virtual memory is not
supported
Monitor, color required, minimum
resolution of 1024 x 768
Opcode OMS v2.3.8 or higher
(supplied)
Apple QuickTime v4.0 or higher
(supplied)