Specifications

9600 -
350/300/233/200
MHz
YES NO
Exception:
13-Slot
chassis with
S/N lower
than
NB0600100C
are
supported.
YES
Exception:
DD007-R
are not
supported
YES
Exception:
PCI-13R &
PCI-6R
are not
supported
YES YES NO
Exception:
13-Slot
chassis with
S/N lower
than
NB0600100C
are
supported.
13-Slot
Only
YES
Exception:
PCI-13R not
supported
9500 YES NO
Exception:
13-Slot
chassis with
S/N lower
than
NB0600100C
are
supported.
YES
Exception:
DD007-R
are not
supported
YES
Exception:
PCI-13R &
PCI-6R
are not
supported
YES
Requires
150 MHz
or Higher
YES
Requires
150 MHz
or Higher
NO NO NO
Exceptions that effect all the above Computers except the 9500 & 9600:
Optional SCSI HBA card bundle (by Apple): For maximum track count, this configuration requires use of a qualified SCSI HBA
card. Optional SCSI HBA cards bundled (by Apple) with Power Macintosh computers are not compatible with this configuration due to
the lack of NV RAM to store Pro Tools desired SCSI transfer rate.
When using HDT 2.5.3 or earlier with a qualified ATTO SCSI HBA card, Firmware v1.1.1 is required.
For Blue & White G3 and G4 computers, ATTO ExpressPro-Tools v2.3.2 or higher is required along with ATTO SCSI HBA card,